Double Wax Heater
The Cetuem Double Wax Heater is a high performance British manufactured wax unit specially developed for Professional use only.
The Two Heaters are Independably Thermostatically Controlled. This enables you to heat two pots of wax or different types of waxing methods at the same time. The Double Heater is made from robust metal sprayed in clinical white with the Classic Cetuem Aromatherapy Leaf Logo to the front of the unit displaying the temperature control. The heater is easy to clean and meets the requirements of the Health & Safety at Work Act.
The Cetuem Wax (Tins) can be placed direct into the wax heater or alternatively as an option, we have available interchangeable wax buckets to quickly swap between different wax methods. For example the Cetuem Wax in the plastic container may be heated in a microwave for a few minutes and poured into the interchangeable bucket ready for use, or the Cetuem Brazilian Wax can be placed in another bucket and heated accordingly in the wax unit, always leaving the heater container free to heat up other beauty treatments such as the SCR Gold Thermo Marine Hydrating Face Mask or our Aromatherapy Thermal Hand and Foot Paraffin Wax theraputic treatments without having to invest in various heaters.
Always stand the Cetuem Wax Heater on a Sturdy Flat Surface with the cable safely out of the way. Plug the Cetuem wax heater into an electrical 3 pin socket.
Remove the lid from the Cetuem Wax Tin and place the container direct into the Cetuem Wax Heater.
If you are using one of our interchangeable waxing buckets, pour the product inside the bucket and place into the wax container.
Leave the wax in the heater between 30 - 45 minutes or until the wax turns into a thin viscosity
Do not forget to always carry out an allergy test on new clients 24 hours prior to application. Carefully and closley check for any contra indications.
Make sure the wax is at the correct working temperature.
Important directions to always remember: Initially switch the heater on at a number 5 and once the wax has half melted lower the temperature control between a 2 or 3 on the wax heater. This will ensure that the wax does not overheat and will also extend the life of the heater itself. Follow with how to use instructions.
Always check the wax temperature on your own wrist prior to applying the wax onto the client. Clean the areas to be waxed with Cetuem Pre Wax Cleanser using a cotton wool pad. With a clean waxing spatula apply a very thin layer of wax following the direction of hair growth. Position the waxing strip over the wax application, first rubbing against the hair growth, then with the hair growth.
Holding the skin taut, pull the strip off quickly against the hair growth. Repeat this method until all the unwanted hair has been removed. Complete the treatment by smoothing over an application of one of the various Cetuem After Wax Products.
Remember, the heating requirement will depend on whether you are heating a full container or less.
Cleaning and maintaining your Cetuem Wax Heater:
Turn the Cetuem Wax Heater off and unplug from the mains.
Wipe any wax residue off the unit using the Cetuem Equipment Cleaner and follow by wiping the heater with Surgical Spirit. Maintain regular yearly pat tests.
Please note that we do NOT deliver this product outside of the UK.